When a school bus stops along the highway to load or unload passengers the stops should be?

By law you must remain stopped until all people are clear of the roadway and the bus is in motion. A stop is NOT required when approaching a stopped bus from the opposite direction upon a highway of four or more lanes. You must stop at least thirty feet from a stopped school bus that is loading or unloading children.

When a school bus stops unload on a divided highway?

When a school bus stops to unload children on a divided highway with no median, vehicles traveling in the same direction as the bus must: Stop until the stop signal on the bus is withdrawn. This answer has been confirmed as correct and helpful.

What is the first thing a driver should do after deciding to make a turn?

First you will need to stop at the stop line, make sure that you do not interfere with pedestrians, bicyclists, or vehicles moving on their green light, and make a turn. If a street has a left turn lane, you must use it when you turn left.

How many feet do you stop behind a bus?

You must come to a full stop about 20 metres (about 4 to 5 car lengths) away from the school bus. This distance allows drivers of other vehicles behind you to see the flashing lights and students crossing the highway.

IT IS INTERESTING:  Quick Answer: Can I run my 30 amp RV on 20 amp?

When a school bus has its light flashing and its stop arm extended?

When a school bus is stopped with its red lights flashing and its stop arm extended, you must stop your vehicle at least 20 feet from the bus. Oncoming traffic and motorists approaching the bus from behind may not move until the stop arm is retracted and the red lights are no longer flashing.

When a school bus is stopped on the road ahead?

Change lanes, drive slowly, and pass the bus cautiously. When a school bus is stopped on the road ahead with its lights flashing and its stop arm extended, you must come to a complete stop and wait to proceed until the lights have stopped flashing and the stop arm is withdrawn.

Which of the following is not a good way to prevent skidding?

Driving at a slower speed A, B, and D will help to avoid skidding, the only answer that will NOT help you avoid skidding on slippery surfaces is C. Making quick stops.

What area of the bus has a danger zone that the driver Cannot control?

The danger zone can be considered to be a rectangle stretching 10 feet from the bus in any direction, with the most dangerous areas being the immediate front of the bus as well as anywhere within arm’s reach of the back half of the bus.

Why should there be seatbelts on school buses?

Combination lap and shoulder belts would require stiffer seats, which could increase injury to students who are not buckled up. The driver cannot ensure that every child has their seat belt on; some buses can carry up to 70 children. … In an emergency, seatbelts could hinder evacuation.

IT IS INTERESTING:  Does Megabus go to North Carolina?
Life on wheels